Split and multisplit installation
One indoor unit per room (1x1) or several indoor units on one outdoor unit (2x1, 3x1 and more). Neat routing of pipes and cables, indoors and on the façade.
A ducted system hides the indoor unit in the false ceiling and sends the air to each room through ducts and grilles. Only the grilles are visible: a discreet solution for whole homes, offices and shops.
The ducted indoor unit in the ceiling void, the supply plenum, the ducts to each room, the supply and return grilles, the refrigerant piping and electrical connection to the outdoor unit, and the condensate drain. The photos below are from our ducted installations, before the ceiling was closed.
A ducted system works well when it is planned from the start: where the unit goes, the space in the ceiling, the route of the ducts, the position of the grilles and access for future maintenance. If you are renovating, contact us before the ceilings are closed and we'll coordinate with the rest of the work.
Yes, the unit and ducts go in a ceiling void. Often a false ceiling in the hallway or bathroom is enough. Send us photos or a floor plan and we'll tell you if it's feasible.
With a standard ducted system the temperature is controlled for the whole area. Zoning systems allow room-by-room control; ask us and we'll tell you the options for your case.
Yes. Quotes are free and with no obligation. The quickest way is to send us photos on WhatsApp.
One indoor unit per room (1x1) or several indoor units on one outdoor unit (2x1, 3x1 and more). Neat routing of pipes and cables, indoors and on the façade.
We remove your old air conditioner and install a new one, checking whether the existing pipes, drain and power line can be reused.
Professional steam cleaning: we sanitise the filters and deep-clean the inside of the unit. Better hygiene, better performance and a longer lifespan.